Hi-Fi accessories

Signal cables

Plug them in. And you won’t be disappointed… Clean, neutral transmission. Excellent soundstage, non-fatiguing and clear highs. Defined and precise bass foundation.

Design

  • OFC copper
  • PVC insulation
  • Double shading
  • Amphenol connectors
  • Protective braid

Technical parameters at a length of 0.75m and a frequency of 1kHz.

R-0.1Ω. • L-0.7 µH. • C-60 pF

Price

  • RCA 1 set in length 0.75m – €85
  • XLR 1 set in length 0.75m €85
  • Other lengths on request
  • Delivery time per order.

saservis@saservis.sk

What they say Customers:

I have to take my hat off to your signal cables once again

Perhaps the biggest disappointment came from cables made by a rather prominent and well-known manufacturer; despite their high price tags, they fell significantly short of the products from SA Electronic Servis. After all, price isn’t everything; I’d describe the SASERVIS cables as “High-End for the budget-conscious,” and for us, they serve as a clear benchmark for future tests…

A noticeable improvement in sound occurred only after replacing the Audioquest Copperhead interconnects with the RCA1 interconnects from SASERVIS. The harshness finally smoothed out, and I achieved that wonderful sound I had been aiming for—detailed, clean, and natural.

Anyone wanting to improve their system’s sound without spending thousands of euros should start with the RCA 1 interconnects…

The RCA1s are excellent—hats off to you…

Yesterday I tested the RCA 1s with Dire Straits albums (1 & 2) in 24/192, plus Clapton’s *Unplugged* in 24/96, and the sound was magnificent…

I certainly haven’t found a competing cable that sounds just as good. I would venture to say that none of the established brands deliver this kind of performance—even at double the price…

Incredible soundstage and resolution…

The cables cleaned up and smoothed out the sound; the bass goes deeper. I am very satisfied…

Digital cables

  • 75 Ohm impedance,
  • double shielding (braid + foil),
  • Amphenol connectors,
  • note: slightly limited flexibility,
  • Length 0.75m – €45,
  • other lengths available upon request.

Made-to-order; delivery time applies.

Power cables

Soothes and cleanses.
For connecting all HI-FI and HIGH-END components.
Integrated and power amplifiers, AV receivers, CD and DVD players and the like.

Technical specifications:

  • standard length – 1.5 m
  • other lengths available upon request
  • cross-section 3 x 2.5 mm
  • shielded
  • protective polyester braid
  • Schurter / Legrand copper connectors

Price €55

2-year warranty.

What customers say:

…As for the sound, there is a real, audible difference. I was expecting a shift in the treble-bass-midrange balance—like when changing interconnect cables—but what I hear is a distinct clearing up of the spectrum. Individual sounds are more defined and solid; the “grit” is gone, and suddenly I can hear details in the recordings (echo reflections, delays) that I had never heard before. The stereo imaging sounds amazing, and you can hear greater depth in the recordings—much like 3D in video.
It certainly improved my already excellent AD/DA converter.
So, I am very satisfied…

I had the chance to compare it with a cable about six times more expensive—one that would have to bow deeply before yours…

…a high-quality power cable = an audible improvement in sound…

…naturally, I highly recommend SASERVIS products; their quality meets the real needs of us customers (even those of us afflicted with “audiophilia”)…

Turntable cables

Clean—no hum or noise. Just calm and serenity. Vinyl sound the way it’s meant to be.

Technical specifications:

  • Silver-plated copper, double shielding (braid + foil)
  • Amphenol connectors
  • Extra ground wire, terminated with gold-plated spade lugs
  • Custom lengths available; standard length 0.75m

Price: €90

Delivery time: Made to order.

What customers say:

I think the new cables have opened up the soundstage, revealing more detail… the whole experience is just more pleasant to listen to…

…Those cables—well, you really have to hear them for yourself; they have soul…

FIX Turntable Cable

You can hear the difference—even on older turntables. You might not even realize what you have at home… Replacement for original “fixed-mount” RCA TURNTABLE CABLES
E.g., Technics, Sony, Rega, JVC, and similar models.

Technical specifications:

  • OFC
  • PVC insulation
  • Double shielding
  • Amphenol connectors
  • Standard length: 0.75m
  • Other lengths available upon request

Price: €45

Installation fee: €35–€75, depending on the device type and complexity.

Delivery time: Made to order.

What customers say:

Thank you for replacing the cables on the Technics SL-1210 turntables; after testing them, I am very satisfied…

…It’s worth it…

Mains conditioner with dynamic throughput

While most commercial mains filters and surge-protected power strips do suppress high-frequency noise, they completely kill an amplifier’s dynamics. Designed to meet industrial standards, they employ cascades of high-internal-resistance coils and oversized input capacitance. For an amplifier’s linear power supply—which needs to instantly draw current spikes from the mains—this acts as an impassable barrier.
The result is a sluggish sound and soft bass lacking drive.

I developed this mains conditioner with the opposite goal in mind: to eliminate mains noise where necessary, yet allow audio components absolute freedom of current flow.

Construction and power distribution:

  • Section 1: 3x DIRECT (No filters or snubbers) – The first three outlets are wired directly to the main input, free from any circuit-based restrictions or added capacitance. They are designed for power amplifiers and output stages that require uncompromising transient response and maximum peak current delivery without the risk of dynamic compression.
  • Section 2: 3x FILTERED (Filtered Zone) – The next three outlets are powered via an uncompromising low-impedance filter featuring massive chokes with minimal DC resistance (DCR). This section is designed for source components (DACs, streamers, preamplifiers), effectively eliminating high-frequency noise without introducing unwanted phase shifts.
  • Dual Surge Protection: The entire unit is protected against mains voltage spikes by a sophisticated two-stage system. At its core is an ultra-fast transient voltage suppressor (TVS) which, unlike standard varistors, does not age or degrade and has no impact on input impedance.
  • Tuning Switch: The high-frequency output filter in the filtered section features switchable attenuation characteristics. The “SMOOTH” position provides sharper filtering and more rigorous suppression of asymmetrical noise, while the “DYNAMIC” position acts to dampen parasitic resonances and is maximally gentle on the dynamics of connected equipment.
    Integrated Shielded Power Cord: The conditioner includes a permanently attached, shielded power cord with a conductor cross-section of 2.5 mm². The chassis-grounded cable shielding acts as a passive Faraday cage—handling external electromagnetic interference (RFI/EMI) without electrically interfering with the signal path.

Result
No hi-fi voodoo here. The device cleans up the mains background, refines textures, and clarifies the soundstage, yet mechanical impact, drive, and bass tightness remain fully preserved.

Price: €275

Delivery time: Made to order.

Reviews

… I have to take my hat off to your signal cables once again …

… Perhaps the biggest disappointment came from cables made by a rather prominent and well-known manufacturer; despite their high price tags, they fell significantly short of the products from SA Electronic Servis. It just goes to show that price isn’t everything; I’d label the SASERVIS cables as “High-End for the budget-conscious,” and for us, they serve as a clear benchmark for future tests…

… The most significant improvement in sound occurred only after swapping out the Audioquest Copperhead interconnects for the RCA1 cables from SASERVIS. The harshness finally smoothed out, and I achieved that wonderful sound I had been aiming for—detailed, clean, and natural.
Anyone looking to improve their system’s sound without spending thousands of euros should start with the RCA1 interconnects…

… The RCA1s are excellent—hats off to you…

… Yesterday, I tested the RCA1s with Dire Straits albums (1 and 2, 24/192) and Clapton’s *Unplugged* (24/96), and the sound was magnificent…

… I certainly haven’t found a competing cable that sounds this good; I’d go so far as to say that nothing from established brands performs at this level for anything less than double the price…

…Incredible soundstage and sonic definition…

…The cables cleaned up and smoothed out the sound; the bass goes deeper. I am very satisfied…

…After connecting them to my TOPPING DX5, I compared them with the original cables. Mr. Janečka’s cables really surprised me. I didn’t expect such a difference in sound.

When comparing, I focus on vocals first. Suddenly, with these, it’s as if you can see right into the singer’s throat.

Precise vocal reproduction is no small feat. Yet here, it seems effortless.

I really enjoyed listening to a male choir. Fantastic. I could literally distinguish individual choir members and their positions. Now *that* is resolution…

Whether it’s individual instruments or an orchestra, the sound is clearly defined and free of coloration. To sum it up: the sound is significantly more composed—despite the increased dynamics—and more precise.

They are excellent for the price. Thank you very much.